Craftsman Lawn Mower 917.374362 Drive Gear Part 404835 UPDATED

Craftsman Lawn Mower 917.374362 Drive Gear Part 404835

Hex Flange Nut

Set up Number FIX11966404

Manufacturer Function Number 532409149

This is an authentic iii/viii-16 hex flange nut, sold individually. This part tin can be used in multiple model types and has a variety of applications. It unremarkably works with a bolt or screw to secure components together. This part can go lost or the threads can become stripped, allowing it to come loose and requiring replacement.

Knob Fly Plate

Fix Number FIX11966132

Manufacturer Function Number 532185577

This is a knob wing plate, which is also sometimes referred to as handle knob. It is fabricated out of plastic and is sourced correct from the original manufacturer, ensuing the perfect fit for your equipment. Your backyard mower has two of these, however they are sold separately. They are located on either side of the upper handle and are used to attach the upper and lower handles together. No tools are need for this quick and effortless repair.

Handle bolt

Fix Number FIX11966260

Manufacturer Part Number 532191574

Bike and tire associates (Front end Bulldoze Wheels)

Fix Number FIX11971248

Manufacturer Part Number 583719501

This is a genuine OEM sourced replacement office is used with walk behind backyard mowers. This is the bulldoze wheel which has plastic gears on the inside. Information technology is designed to be driven by a pinion gear which is sold separately. If the wheel is broken or damaged it should be replaced to ensure smooth ride and consistent cut of the grass. Includes one (1) plastic wheel.

Selector knob

Fix Number FIX11966513

Manufacturer Part Number 532701037

Bike & Tire Assembly, Front

Ready Number FIX11966348

Manufacturer Office Number 532403111

This is a single OEM front cycle and tire assembly for walk-behind lawn mowers. When the gear case is engaged, the drive bicycle pushes the mower forward. Y'all volition need a wrench for this very basic repair. You will start past removing the lock nut, remove the former wheel, secure the new 1 in place, and secure the lock nut. This wheel has a white hub and black condom treads around the perimeter. Its diameter is approximately 8 inches, and its width is roughly 1.75 inches.

Backyard Mower Engine Control Cable

Fix Number FIX11966113

Manufacturer Role Number 532183567

This is a lawn mower engine command cable, likewise sometimes referred to every bit a zone command cable. This part is sourced directly from the manufacturer and is sold individually. It is comprised of a metal wire with Z-blazon aptitude ends, a rubberized outside, and a plastic clip. This role is designed to stop the engine when you release the handle. The conduit measures approximately 52.5 inches and the cable measures roughly 61.5 inches.

Pinion.14.te

Fix Number FIX11966353

Manufacturer Function Number 532403849

Pawl, Drive

Gear up Number FIX11966361

Manufacturer Part Number 532404845

Blade

Fix Number FIX10033626

Manufacturer Part Number 942-0741A

This is an original manufacturer mulching blade for a lawn mower and it is sold individually. This blade measures 21-inches long, making it compatible with 21-inch decks. The blade will habiliment over time, it can rust, scrap, warp, especially if it has striking a large object. If you observe it is tearing the grass and non cutting efficiently, this is a common symptom of a damaged or dull blade. For this DIY repair, first by disconnecting the spark plug from the kick and turning the mower on its side, making sure the air filter and carburetor are facing upward. Remove the bolt and blade bell support and and then remove the blade from the adapter. You may wish to lubricate the engine crankshaft and the inner surface of the blade adapter with light oil. Next, place the blade adapter on the crankshaft. Put the blade on the adapter, making sure the side of the blade that is labelled with the word bottom (or with the part number) is facing the basis while the mower is in proper position. Double bank check that the blade is aligned properly and seated securely on the bract adapter flange. Place the blade support on the blade and align the holes on the blade bell back up with the ones on the blade. Supersede the hex bolt and tighten to the manufacturers recommended torque.

DOWNLOAD HERE

Craftsman Lawn Mower 917.374362 Drive Gear Part 404835 UPDATED

Posted by: christopherproughat00.blogspot.com